Social Media

Follow us on: 

Event Calendar

Monday, October 15, 2018

Balancing of Rotating Machinery - Oak Brook, IL

Start Date: 10/15/2018 12:00 PM CDT
End Date: 10/19/2018 5:00 PM CDT

Venue Name: Interactive Business Center

2625 Butterfield Rd., Ste. 211S
Oak Brook, IL  United States  60523

Organization Name: Vibration Institute

Carolyn Porter
Phone: 630.654.2254


course covers single and basic two-plane balancing techniques. It includes both field balancing and shop (balancing machine) balancing. Topics such as pre-balance checks, influence coefficients, balance quality and tolerances, residual unbalance testing and case histories are included. It is partial preparation for the Vibration Analyst Category III and IV, and Balancing Specialist Certification Exams.

Instructor: Bill Pryor

BILL PRYOR is the Technical Director for PDM Solutions, Inc. He has over 35 years experience in the vibration analysis and rotating machinery field. Field experience includes machinery troubleshooting, balancing, alignment, structural analysis, transient testing, and commissioning of rotating equip-ment. In addition, he has assisted in the establishment of many PdM pro-grams throughout industry. Before joining PDMS, Pryor was with PSEG Power from 1986 to 1999 as a Sr. Test Engineer and Bently Nevada Corpo-ration from 1977 to 1986. He has an AAS in Product and Machine Design from the State University of New York at Alfred. He sits on the Board of Directors of the Vibration Institute. Before joining the Institute’s Training department he was actively involved in the Vibration Institute’s certification committee. Pryor is certified Vibration Analyst Category IV.


Course Materials:

Course PowerPoint follow-along deck
Course notes
Workbook containing examples, workshop problems and the Body of Knowledge found in Vibration Institute Guideline No. 1 requirement for qualification and assessment of balancing personnel
Training course examination study guide
Calculator, ruler and balancing tools
Certificate of completion (3.7 CEUs)

Course Agenda:

Monday, Noon - 5:00 p.m. 
Tuesday - Friday, 8:00 a.m. - 5:00 p.m.

Balancing exam - Saturday, 8:00 a.m. - 12:00 p.m.

Registration Fees: 

$1,975 USD Nonmember ($1,880 VI Members)
$100 expidited materials fee for registrations received within 1 week of course starting.

Date & Location:

Holiday Inn Chicago Oakbrook Terrace
19 W. 350 22nd St.
Oakbrook Terrace, IL 60181

To reserve, please call 630-833-3600,
mention Vibration Institute.  

Course Content:

Basic Aspects of Machine Balancing
Purpose, mass unbalance force and causes, rotor classification, techniques, equipment, pre-balancing checks, critical speeds, trial weight selection/placement, and pitfalls.

Single-Plane Balancing Techniques
Vector and four-run methods, critical speeds, modes, heavy spot high-spot relationship, balance sensitivity, phase lag, trial weight selection, weight splitting, criteria and standards, one-shot method.

Workshop I: Balancing Topics
Class exercises on basic principles.

Workshop II: Single-Plane Balancing
Hands-on exercises using a rotor kit, vector method, single-plane balancing; registrants can bring an instrument or use the Institute’s equipment.

Two-Plane Balancing Techniques
Basic Influence coefficient and static/couple methods, one-shot balancing, two-plane balancing, strategy, and procedures.

Workshop III: Two-Plane Balancing
Static-couple method, class exercises.

Workshop IV: Two-Plane Balancing
Influence co-efficient method, class exercises.

Turbine/Generator Balancing
Procedures, static/couple method, influence coefficient method, plane/sensor selections, strategy for least runs.

Roll Balancing
Weight placement, critical speeds, bow effects.

Fan Balancing
Balancing techniques (single- and two-plane), overhung fans, balance sensitivity, critical speeds, case histories.

Shop Balancing Techniques
Balance machine procedures and calibration.

Balancing Case Histories
Balancing in the field, procedures, strategies, and pitfalls.

Course Review

Training Examination on Course Content (1.5 hours)

Training Examination Review


Optional Certification Exam to be administered on the day AFTER the course.
Vibration Analyst Category I: $300
Vibration Analyst Category II: $350
Vibration Analyst Category III: $400
Vibration Analyst Category IV: $450
Balancing Field Specialist Exam: $300

Cancellation of a training course registration and transfer to another course within the same calendar year will be honored provided written notification is received by the Institute office via e-mail or mail no later than ten (10) business days before the first day of the scheduled training course. If cancelling a training course registration and not transferring to another course within the same calendar year a $250 cancellation fee will be assessed. A $500 administrative fee will be charged for cancellations received less than ten (10) days from the start date of the registered training course. Please contact the Vibration Institute staff directly regarding discounts for multiple registrations from the same organization. No-shows for the course will not receive a refund. There are additional cancellation fees applied for exam cancellations.

Online Registration

Registration is Closed
Closed: 10/5/2018 12:00 PM

Display Roster

Add to my calendar


Google |  Yahoo